GE 20 Serie Manual Del Propietario E Instalación página 10

Replacing the light bulb.
Turning the control to the 0 (off) position does not remove power to the light circuit.
10
Refrigerator Compartment
CAUTION: Light bulb may be hot.
Unplug the refrigerator.
The bulb is located at the top of
the refrigerator compartment, behind
the temperature control.
To remove the light shield, grasp the
shield with two hands as shown. Bend
the sides of the shield slightly toward
the center until the tabs release and the
back of the shield comes out. Slide the
shield back and take it out.
Replace the bulb with an appliance
bulb of the same or lower wattage.
To replace the light shield, insert the
tab at the front of the shield into the
opening at the front of the recess
and push the back of the shield up
until the tabs on the sides of the
shield snap into place.
Plug the refrigerator back in.