GE 20 Serie Manual Del Propietario E Instalación página 17

1 REMOVE THE FREEZER DOOR
Tape the door shut with masking tape.
Remove the hinge cover on top of the freezer door.
Remove the screws, then lift the hinge straight up
to free the hinge pin from the socket in the top of
the door.
Remove the tape and tilt the door away from the
cabinet. Lift it off the center hinge pin.
Set the door on a non-scratching surface with
the inside up.
TRANSFER THE FREEZER
2
DOOR STOP TO THE LEFT
Remove the freezer door stop, located on the bottom
right side of the freezer door, and install it on the
left side.
Bottom of Freezer Door
(Right Side)
Installation Instructions
Top Hinge
Bottom of Freezer Door
(Left Side)
3 REMOVE THE
REFRIGERATOR DOOR
Tape the door shut with masking tape.
Remove the screws attaching the center hinge to
the cabinet. Then lift the hinge straight up to free
the hinge pin from the socket in the top of the
door. Be sure to keep the washer with the hinge.
Remove the tape and tilt the door away from the
cabinet. Lift the door straight off the bottom hinge
bracket.
Set the door on a non-scratching surface, with the
inside up.
CAUTION: Do not let door drop to the floor.
To do so could damage the door stop.
TRANSFER THE REFRIGERATOR
4
DOOR STOP TO THE LEFT
Remove the 2-piece refrigerator door stop, located
on the bottom right side of the refrigerator door, and
install it on the left side.
Bottom of Refrigerator Door
(Right Side)
17
Washer
Hinge Pin
Bottom of Refrigerator Door
(Left Side)