Descargar Imprimir esta página

Parkside PPS 40 B3 Instrucciones De Funcionamiento Y De Seguridad página 11

Cortador de plasma

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
stop device) which are easily
accessible.
Danger from smoke emis­
sion when plasma cutting:
Inhalation of fumes which
result from plasma cutting can
endanger health.
Do not keep your head in the
fumes.
Use the device in open areas.
Only use the device in
well-ventilated spaces.
Danger from flying sparks
when plasma cutting:
Cutting sparks can cause an
explosion or fire.
Keep flammable substances
away from the cutting location.
Do not use the plasma cutter
near flammable substances.
Cutting sparks can cause
fires.
Keep a fire extinguisher close
by and an observer should
be present to be able to use it
immediately.
Do not carry out plasma
cutting on drums or any other
closed containers.
Danger from arc beams:
Arc beams can damage your
eyes and injure your skin.
Wear a hat and safety
goggles
Wear hearing protection and
high, closed shirt collars.
Use a welding safety helmet
and make sure that the filter
setting is correct.
Wear complete body
protection.
Danger from electro­
magnetic fields:
Cutting current generates
electromagnetic fields.
Do not use if you have a
medical implant.
Never wrap the cutting cable
around your body.
Guide cutting cables together.
z Welding mask­specific
safety instructions
With the help of a bright light
source (e.g. lighter) examine
the proper functioning of the
welding shield prior to starting
with any cutting work.
Cut spatters can damage the
protective screen. Immediately
replace damaged or scratched
protective screens.
Immediately replace damaged
or highly contaminated or
GB/IE/NI/CY/MT
11

Publicidad

loading