Publicidad
Idiomas disponibles
Idiomas disponibles
Tool Specifications
Impact Drill
Order number
Rated input power*
Output power
Rated speed
1st gear
2nd gear
Impact rate, max.
1st gear
2nd gear
Chuck clamping range
Maximum drilling Ø
(1st/2nd gear)
Brickwork
Steel
Wood
Weight without cable,
approx.
Protection class
Machine Elements
1 Depth stop
2 Key chuck
3 Auxiliary handle
4 Gear selector
5 "Drilling/Impact Drilling" selector switch
6 Lock-on button for On/Off switch
7 On/Off switch
Not all of the accessories illustrated or described are
included as standard delivery.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the ma-
chine are: Sound pressure level: 96 dB (A);
sound power level: 109 dB (A).
Wear hearing protection!
The typically weighted acceleration is 9 m/s
Intended Use
The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling in
wood, metal, ceramics and plastics.
BTI-SB 1150 E
015857
[W]
1 150
[W]
670
[rpm]
0 – 700
[rpm]
0 – 2100
[bpm]
14 000
[bpm]
42 000
[mm]
1.5 – 16
[mm]
35 / 16
[mm]
16 / 10
[mm]
50 / 30
[kg]
4,0
/ II
2
.
English - 1
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed.
Wear protective glasses and hearing protec-
tion.
Wear sturdy shoes.
For long hair, wear hair protection. Work only
with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Do not op-
erate the machine in rain or moisture.
Always direct the cable to the rear away from
the machine.
Operate the machine only with the auxiliary
handle 3.
Hold the power tool only by the insulated
gripping surfaces, when performing an op-
eration where the cutting tool may run into
hidden wiring or its own cord.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the op-
erator.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assist-
ance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
BTI is only able to ensure perfect operation of
the machine if the original accessories in-
tended for it are used.
Publicidad
