Descargar Imprimir esta página

Worx Nitro WG752 Serie Manual Del Usuario página 11

Cortacésped sin cables

Publicidad

Idiomas disponibles

Idiomas disponibles

c) Disengage the self-propelled mechanism
or drive clutch on units so equipped before
starting the motor.
d) Never attempt to make a wheel height
adjustment while the motor is running.
e) Mow only in daylight or in good artificial light.
f)
Never operate the equipment on wet grass.
Always be sure of your footing. Keep a firm
hold on the handle and walk, never run.
1.3 Operation
a) Do not put hands or feet near or under rotating
parts. Keep clear of the discharge opening at all
times.
b) Stop the blade(s) when crossing gravel drives,
walks, or roads.
c) After striking a foreign object, stop the motor,
unplug, thoroughly inspect the mower for
any damage, and repair the damage before
restarting and operating the mower.
d) If the equipment should start to vibrate
abnormally, stop the motor and check
immediately for the cause. Vibration is
generally a warning of trouble.
e) Stop the motor and unplug whenever you leave
the equipment, before cleaning the mower
housing, and before making any repairs or
inspections.
f)
Shut the motor off and wait until the blade
comes to a complete stop before removing the
grass catcher or before unclogging the chute.
g) Mow across the face of slopes, never up and
down. Exercise extreme caution when changing
direction on slopes. Do not mow excessively
steep slopes.
h) Never operate the mower without proper
guards, plates, or other safety protective
devices in place.
i)
Do not wash with a hose, avoid getting water in
motor and electrical connections.
1.4 Maintenance
a) Check the blade and the motor mounting bolts
at frequent intervals for proper tightness.
b) Keep al nuts, bolts, and screws tight to be sure
the equipment is in safe working condition.
c) Check bag frequently for deterioration and
wear, and replace worn bags. Check that
replacement bags comply with the original
manufacturer's recommendations or
specifications.
d) Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could
damage the motor drive unit or cause personal
injury.
e) Sharpen a dull blade equally at each end to
maintain the balance.
f)
Clear the blade thoroughly and check its
balance by supporting it horizontally on a thin
Cordless Lawn Mower
nail through its centre hole. The mail should
also be in a horizontal position. If either end
of the blade rotates downward, remove some
metal from the heavy or lower end until the
blade is balanced. It is balanced when neither
end drops.
SAVE THESE INSTRUCTIONS
SYMBOLS
CPSC Danger label
KEEP HANDS AND FEET AW AY
GARDER MAINS ET PIEDS À DI S TANCE
Severing of toes or fingers-Rotary
mower blade
Thrown objects from mower deck
Keep bystanders/children away
Safety alert
Slip on slope
Read the operator's manual
Blade continues to rotate after the
machine is switched off. Wait until all
machine components have completely
stopped before touching them.
Wear protective gloves
Li-Ion battery, battery must be
recycled.
Li-I on
11
EN

Publicidad

loading