VEVOR LB100T Manual De Instrucciones página 10

into the water tank and activate the cleaning mode for internal circulation
cleaning, supplemented with a brush to wipe the scale on surface; if those
are not available, you can also use undiluted white vinegar, pour into the
water tank and use the same cleaning mode, supplemented with a brush to
wipe the scale on surface. Immediately after descaling, be sure to use
clean water internal and external circulation to clean the entire tank,
pipeline, water pump and evaporator at least 3 times (each time you need
to unscrew the drain cap to discharge the descaling agent) to ensure food
safety and prevent corrosion damage by residues
4. The ambient temperature has a great influence on the ice making speed
and life cycle. Please use the equipment under ambient temperature of
15-35 ℃, and ensure that the space surrounding and even space on the
top are more than 30cm， then the equipment can be well ventilated and
working;
5. Unplug the power supply at least quarterly, open the front panel and use
compressed air with a soft brush to remove the dust on the surface of the
condenser, then the equipment can run normally and ice-making efficiency
is good;
6. Please ensure that the power supply voltage is stable and the socket is
reliably grounded for personal and equipment safety;
7. If main power is accessible inside the equipment. Non-professionals are
not allowed to do disassemble and repair works, Any maintenance
involving the inside components of equipment must be performed when it
is completely powered off!
INSTALLPACKING LIST
A. Take out the inlet pipe, filter, filter connecting pipe, and drainage pipe
accessories from the accessory box (corresponding to item numbers
1/3/4#).
- 9 -