Publicidad
Idiomas disponibles
Idiomas disponibles
B.Install the filter element and water faucet: Use two 2-way PE pipes into
each end of the filter(pay attention to the direction of the arrow on the filter),
connector to connect the inlet pipe of the ice maker to the filter element,
use a ¾"connector to connect the ice maker, and use a ½"connector to
connect the Drinking water connectiongend .
a ¾"connector
a ½"connector
C.Take out the water inlet pipe, filter, and drain pipe
in the accessory box (the water inlet route shown in
the diagram -- from the faucet to the main unit
water inlet pipe ; the drain route -- from the drain
outlet to the floor drain), and connect them to the
positions shown in the figure respectively.
Ice Maker Drainage Pipe
The Whole Machine Drainage Installation Notes:
1. Gravity Drainage: Combine the drainage pipes of the main unit and ice
storage bin, and connect them to the floor drain together.
- 10 -
Publicidad
