Sofirn SP35T Manual página 3

 Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured
to hard-anodized to military grade specification type III, anti-abrasive finish to get
solid built body, anti-crash geometry and better heat exchange.
 Toughened mineral glass lens
 Water resistance: IPX-8 (up to 2 meter under water, not for diving)
 Mode Memory: While on lighting mode, the flashlight memorizes the last
brightness level used in the general lighting modes (Eco/Low/Medium/High)
 Advanced Temperature Regulation (ATR) technology: As the temperature rises,
SP35T is programmed to automatically step down or step up the brightness. The
higher the temperature gets, the more the brightness will drop. Once temperature
decreases, brightness will be increased again according to your selected mode.
Battery Specifications
Battery Type
Rechargeable li-ion battery
Battery Installation
Before first use, please unscrew the tailcap and remove the insulating film. If the
battery needs to be replaced, make sure that the positive end of the new battery faces
the flashlight head when you put it in.
Power Indicator
The LED indicator in the side switch shows the power status for 5 seconds after
turning SP35T on.
Green = remaining battery power is 70%-100%.
Flashing Green = remaining battery power is 40%-69%.
Red = remaining battery power is 10%-39%.
Flashing Red = critical power, replace or recharge battery as soon as possible.
Recharging
SP35T offers a USB-C port for convenient recharging of its battery. Please connect it
with the included USBA to USBC cable and use a USB power adapter (not included)
with 5V/2A. While charging the LED power indicator flashes red. Once finished the
indicator will turn green to indicate a full battery. While charging, the flashlight will
Dimension & Quantity
21700 x 1
Compatibility
Yes, recommended