Descargar Imprimir esta página

Trevi XR 8A35 Guía De Uso página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

BLUETOOTH OPERATION
PAIRING DEVICES
1. Place the speaker near the Bluetooth device to pair;
2. Switch On the speaker, in the absence of connected external memories, the device
will immediately go into Bluetooth mode, otherwise press the M key (8) until you
hear a notification sound and the Bluetooth indicator (10) will start blinking rapidly;
3. Follow the instructions of your device to search for the speaker;
4. Search and pair the speaker named "XR 8A35" and enter the PIN "0000" if reque-
sted;
5. Once pairing is complete, you will hear a confirmation sound and the Bluetooth
indicator (10) will remain solid blue. Now is possible to play the music tracks.
Notes:
- The Bluetooth speaker only works with a connection at a time, the connection can
not be interrupted during normal operation.
- When the Bluetooth pairing with external devices fails, delete another Bluetooth
device in the list of connections, restart the Bluetooth speaker and search for the
signal again.
CONTROLS AVAILABLE IN BLUETOOTH MODE
MUSIC PLAYBACK
-
To start music playback, press
-
Press and hold the - (12) or + (11) button to go to the previous or next song;
-
Press
button
IN PHONE CALL
When a call is received, a sound warning will be heard.
-
When you receive a call, click once on
the speaker phone feature, press again to end a call.
-
Long press
TWS OPERATION (TRUE WIRELESS STEREO)
This function allows you to pair 2 speakers (to be purchased separately) for stereo music
playback; This feature is only available in Bluetooth mode with compatible devices.
1. Turn off the Bluetooth function on your phone or other Bluetooth device;
2. Turn on the two XR 8A35 units and choose the Bluetooth mode;
3. Quickly press the M (8) button on one of the speakers twice (enable TWS pairing,
a sound will be heard). After a few seconds the two speakers will be paired (a
confirmation sound will be heard);
4. Using your device to search the pairing name "XR 8A35" and enter the PIN "0000"
if required, music is ready to play for the two units together after paired.
In case of non-pairing between the 2 speakers, switch off both devices and repeat
steps 1, 2 and 3.
(7) to pause, press it again to resume music playback.
button (7) to reject a call.
button (7) or start it from your device;
button (7) to open the call and activate

Publicidad

loading