Publicidad
Idiomas disponibles
Idiomas disponibles
Never connect the product
•
with an external timer, as this
could be dangerous.
The
product
•
supervised while in use.
If the product begins to
•
smoke, unplug the product
immediately.
Place the product on a flat
•
and stable surface.
Allow about 30 min for
•
the product to completely
cool down before you start
cleaning or storing it.
PRODUCT FEATURES
The contents of the package will contain
the following items, in addition to this
manual and the product warranty. See
image 01 on page 4.
Note: Orientative image. The content may
vary from one model to another.
1. Display panel
2. Rack
3. Handle
4. Pot cover
5. Main housing
6. Frying pot
7. Air outlet
8. Window
To see the characteristics of the product
you can see the table 01 on page 6.
ASSEMBLY AND INSTALLATION
Remember where each item is located in
case you need to repack it in the future.
Do not use the handle of the appliance to
move it or as a support.
If you notice any type of damage or failure,
please contact the seller.
must
be
This product does not need any installation.
However before using it there are some
steps to be followed:
OPERATING THIS PRODUCT
Before your first use
Control panel
• The
manufacturer
responsible
for
the product may have due to a bad
installation
• Before using it for the first time, remove
all protective foils and adhesive strips.
• The voltage in the room must match
that of the appliance and it must be
plugged into an earthed outlet.
• Choose a well-ventilated place, where
the device is not exposed to sunlight,
high temperatures or humidity, as the
latter may cause stains.
• To move the appliance, disconnect it
from the electrical network and remove
all the food inside.
• Put the product on a surface that is
leveled, even, and stable, do not put
the product on surface that is not heat-
resistant.
• Put the frying tray into the fryer tank
correctly.
• Never pour oil or other liquid into the
fryer tank .
• Never put things cover the air inlet
opening of the product, for this will
prevent the airflow and reduce the
effect of hot air heating.
• Remove packaging, as well as any
temporary stickers.
• Place the fryer on a level, heat resistant
surface.
Keep
sensitive surfaces.
• Extract the baskets with the help of
the handle and clean them in the
dishwasher or with a sponge and non-
abrasive products. Also clean the inside
of the fryer and dry it with a cloth.
• A first functional test will serve to
familiarize yourself with the device and
to check that it works correctly.
will
not
the
damage
that
away
from
steam
EN
be
25
Publicidad
