Symbols on the unit
Installation and connection
Installing the unit
NOTE
The unit must be set up above water level. Return flow of water will damage the unit.
B, C
Observe the following conditions:
• Ensure that the unit is installed with a safety distance of at least 2 m from the water.
• Position the unit in such a way that it does not present a hazard to anyone.
• Install the unit in a stable, horizontal and flood-protected position.
Connect the unit
How to proceed:
D
• Route the air hose so that it is protected.
– Keep the air hose as short as possible.
• Connect the aeration stone to the air hose and position the aeration stone in the pond.
• Attach the free end of the air hose to the air outlet on the unit.
Commissioning/start-up
Switching on: Connect the unit to the mains. The unit switches on immediately.
Switching off: Disconnect the unit from the mains.
The unit is protected against the ingress of splash water.
Do not dispose of the unit with normal household waste.
Read the operating instructions.
EN
11