testo 606-2 Manual De Instrucciones página 15

2 Press
3 Press
4 Repeat steps 2 and 3 for all functions.
- The instrument changes to measuring mode.
Using the product
To guarantee correct readings:
· Repeat the measurement at several points. Always measure wood
moisture across the grain.
· Keep temperature and humidity sources which may falsify the
measurement (e.g. hands) away from the sensor.
The values displayed are highly dependent on the building
material/manufacturer used, and on the ambient conditions .
As the materials are natural, the same materials can vary from
batch to batch.
Switching t t he i i nstrument o o n:
Press
- Measuring mode is opened.
Switching t t he d d isplay l l ight o o n:
The instrument is switched on.
Press
- The display light goes out automatically if no key is
pressed for 10 seconds.
Setting t t he m m aterial c c haracteristic c c urve:
The material moisture is indicated in the top line of the
display. The material symbol
material) is displayed with the relevant material number (see
enclosed sticker for the inside of the protective cap).
Settable materials
1. beech, spruce, larch, birch, cherry, walnut
2. oak, pine, maple, ash-tree, douglas fir, meranti
info@Testo-Direct.com
3. cement screed, concrete
4. anhydrite screed
5. cement mortar
6. lime mortar, plaster
7. bricks
( ) several times until the desired setting flashes.
( ) to confirm the input.
.
.
www.
Using the product 15
(wood) or
Measuring range
8.8...54.8 % by weight
Testo-Direct 7.0...47.9 % by weight
0.9...22.1 % by weight
0.0...11.0 % by weight
0.7...8.6 % by weight
0.6...9.9 % by weight
0.1...16.5 % by weight
(building
1.888.475.5235
.com