testo 606-2 Manual De Instrucciones página 17

Maintaining the product
Changing b b atteries:
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
Cleaning t t he h h ousing:
Clean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
Questions and answers
Question
Hi or Lo
Testing the instrument
function: Test: ok does
not light up
Meas. electrodes defective/
worn
info@Testo-Direct.com
Possible causes/solutions
· Readings outside the measuring range (too high, too
low): Keep to the permitted measuring range.
· Residual capacity <10 min: Change batteries.
· Clean sensing electrodes and contacts on the top
of the protection cap.
· If the error message appears again, send the
instrument to Testo Customer Service.
· Send instrument to Testo customer service.
Testo-Direct
www.
Maintaining the product 17
.com
1.888.475.5235