Publicidad
down or damage and contact an official technical support service. In order to prevent any
risk of danger, do not open the device. Only qualified technical personnel from the brand´s
Official technical support service may carry out repairs or procedures on the device. Only
for indoor use. Product has a thermal safety component that operates in case of abnormal
higher temperatures. In case of operation of this component, it is needed to unplug the
product from mains and let cool for at least 15min.
B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
BEFORE USE
1. Thoroughly clean the parts that come into contact with food before you use the appliance
for the first time.
2. Let hot ingredients cool down before you process them (max. temperature 60°C).
3. Cut large ingredients into pieces of approximately 2 cm before you process them.
4. Assemble the appliance properly before you put the plug in the wall socket.
INSTRUCTIONS FOR USE
USE OF THE HAND BLENDER
The hand blender is intended for blending liquids (e.g. dairy products, sauces, fruit juices,
soups, mixed drinks and shakes), mixing soft ingredients, and pureeing cooked ingredients
(e.g. for making baby food)
1. Attach the blender blade to the motor unit. It will "click" into place.
2. Immerse the blade guard completely in the ingredients.
3. Press the speed button (I) or turbo speed button (II) to switch on the appliance.
4. Move the appliance slowly up and down and in circles to blend the ingredient.
The appliance has variable speed control function showed on unit top, please refer to Fig.1.
Turn the speed control clockwise to increase the power or counterclockwise to decrease the
power.
USE OF THE CHOPPER
The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese,
boiled eggs, garlic, herbs, dry bread etc.
The blades are very sharp! So be very careful when handling the blade unit. Be especially ca-
reful when you remove the blade unit from the chopper bowl, when you empty the chopper
bowl and during cleaning.
1. Attach the chopper blade unit in the chopper bowl.
2. Add the ingredients in the chopper bowl.
3. Fix the coupling unit onto the chopper bowl.
4. Insert the motor unit onto the chopper bowl.
5. Press the speed button (I) or turbo speed button (II) to switch on the appliance.
If the ingredients are sticked to the wall of the chopper bowl, loosen them by adding liquid or
using a spatula. Always let the appliance cool down after chopping meat.
USE OF THE WHISK
The whisk is intended for whipping cream, whisking egg whites, desserts etc.
1. Insert the whisk to the coupling unit.
2. Insert the coupling unit to the motor unit.
16
Publicidad
