Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Start cooking
Touch the ON/OFF control. After
power on, the buzzer beeps once,
all displays show "–" or "– –",
indicating that the induction hob has
entered the state of standby mode.
Place a suitable pan on the cooking
zone that you wish to use.
• Make sure the bottom of the
pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection
control, and an indicator next to the
key will flash
Select a heat setting by touching
the slider control
• If you don't choose a heat setting
within 1 minute, the Induction hob
will automatically switch off. You
will need to start again at step 1.
• You can modify the heat setting at
any time during cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display "
is placed on it.
"will automatically disappear after 1 minute if no suitable pan
alternately with the heat setting
EN-18
Publicidad
