Publicidad
Idiomas disponibles
Idiomas disponibles
A(mm)
B(mm)
760
50 min.
WARNING: Ensuring Adequate Ventilation
Make sure the induction cooker hob is well ventilated and that air inlet and
outlet are not blocked. In order to avoid accidental touch with the
overheating bottom of the hob, or getting unexpectable electric shock during
working, it is necessary to put a wooden insert, fixed by screws, at a minimum
distance of 50mm from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure
these holes are not blocked by the worktop when you put the hob into
position.
• Be aware that the glue that join the plastic or wooden material to the
furniture, has to resist to temperature not below 150℃, to avoid the
unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must therefore be
able to withstand an temperature of 90℃.
C(mm)
D
20 min.
Air intake
EN-35
E
Air exit 5mm
Publicidad
