Publicidad
Idiomas disponibles
Idiomas disponibles
Operation of Current Device
RESET
TEST
The power supply cord contains a measurement current device that senses damage to the power cord.
Test your power supply cord as follows:
1.
Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET Button. You will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also
indicated by a light on the plug head.)
NOTICE
Grounding type wall receptacle
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Power supply cord with 3-prong grounding
plug and current detection device.
The power supply cord with this air conditioner contains a current detection device designed
to reduce the risk of fire.
In the event that the power supply cord i s damaged, it can not be repaired. It must be replaced
with a cord from the manufacturer.
NOTICE
• Do not use this device to turn the unit on or off.
• Always make sure the RESET button is pushed in for correct operation.
• The power supply must be replaced if it fails to reset when either the TEST button
is pushed, or it can not be reset. Please contact Customer Service.
Plug in &
press RESET
04
Publicidad
