Publicidad
Idiomas disponibles
Idiomas disponibles
Installation with inverters of >5500W and up to 14000W.
The DC cable lines only support 100A at 48V, so they could only output about 5000W
AC. To use larger inverters, it is necessary to divide the batteries into subgroups and
connect them to the solar inverter through a BJM (Battery junction module).
Two battery subgroups with one BJM can power inverters up to 9500w. Three battery
subgroups connected by BJM can power inverters up to 14000W.
CAUTION: If other than original batteries are used, a suitable circuit breaker is
required between the battery system and the inverter.
CAUTION: The installation must be carried out by a professional installer and must
comply with the local regulations or regulations for electrical installations.
34
Publicidad
