Tenda IT Serie Guía De Instalación Rápida página 4

Install the device
Install the camera
Tips
− Please make sure the wall or the ceiling is strong enough to withstand three times the weight
of the camera.
− You may need to prepare a hammer drill, a drill bit, a rubber hammer, a screwdriver, and a
ladder for the installation.
− The camera supports ceiling and wall installation. The installation bracket required for the
installation is not included in the package. Please purchase it by yourself.
Wall installation
The bracket installation process may vary based on different
manufacturers and models. The following figures are for reference only.
Please refer to the actual bracket.
❶
Marker pen
❸
Reserve the screws for
later use (step )
Screws provided
with the bracket
- 3 -
❷
❹