Publicidad
Idiomas disponibles
Idiomas disponibles
EN
22
BEFORE FIRST USE
•
Remove the outer and inner packaging, then check that all accessories are
included. If parts are missing, please contact our customer service.
•
Remove all adhesive strips from the device. Remove the accessories inside.
•
Clean the interior with lukewarm water and a soft cloth.
•
Place the ice maker on a level table away from direct sunlight and away from
other heat sources (stove, oven, or radiator).
•
Make sure there is at least 15 cm clearance between the back and sides of the
ice machine and the wall.
•
Wait one hour for the refrigerant liquid to settle before turning on the ice
machine.
•
The mains plug must be directly accessible.
Note: Only fill the water reservoir with drinking water. Do not use distilled
water.
Before you use your ice maker, you should clean it thoroughly (see CLEANING AND
CARE). Unplug the device before cleaning or performing maintenance.
CLEANING AND CARE
•
Remove the drawer and the water tank on the top.
•
Clean the interior with diluted detergent, warm water and a soft cloth. Pour
warm water with diluted detergent into the internal water tank first, and then
wipe the surface with a soft cloth.
•
Rinse the interior parts again with water and drain the water by removing the
drain cap on the back.
•
The exterior of the ice maker should be cleaned regularly with a mild dish
soap solution and warm water.
•
Dry the inside and outside with a soft cloth.
•
If the device is not to be used for a long time, open the water drain cap and
remove the plug to completely drain the water from the water tank.
Publicidad
