Publicidad
Idiomas disponibles
Idiomas disponibles
15. DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE) AND EC
DECLARATION OF CONFORMITY
The Manufacturer Fratelli Comunello S.p.A. hereby with headquarters in Via Cassola 64, 36027 Rosà (VI), Italy, declares under
its own responsibility that the following products:
LIWIN L40 Slim - 24V, LIWIN L40 Slim - 24V - Wi-Fi
LIWIN L40 Slim - 230V, LIWIN L40 Slim - 230V - Wi-Fi
Product description: Chain actuator for windows
Year of construction from 2024 They satisfy the applicable essential requirements of the Machinery Directive 2006/42/EC, Annex
I, Art.1.1.2, 1.1.3, 1.1.5, 1.2.1,1.2.3, 1.2.6, 1.3.9, 1.5.1, 1.5.2, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.7.1, 1.7.1.1, 1.7.3, 1.7.4.2, 1.7.4.3
The relevant technical documentation is compiled according to Annex VII, section B
The person authorized to compile the relevant technical documentation is Fratelli Comunello SPA. Mail: info@comunello.it
Mail: info@comunello.it
Upon adequately motivated request from the national authorities, the technical documentation of the aforementioned products
will be made available, via e-mail, within a time compatible with its importance. Furthermore, the aforementioned products
comply with the relevant provisions of the following Directives:
• 2014/30/EU Electromagnetic Compatibility Directive
• 2014/35/EU Low Voltage Directive
• 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS Directive)
and the following harmonized standards and/or technical specifications:
IEC 60335-2-103:2006, IEC 60335-2-103:2006/AMD1:2010 in conjunction with
IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/AM2 :2016
EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
EN 61000-6-3 Generic standards - Emission standard for equipment in residential environments
ETSI EN 300 328 V2.2.2
The commissioning of a complete machine which includes the above-mentioned partly completed machine, supplied by us, is
not permitted until it is ascertained that the installation has been carried out according to the specifications and installation
instructions contained in the "Instruction Manual" supplied with the partly completed machinery and that an acceptance
procedure has been completed and documented, in a specific protocol, by a qualified technician.
This declaration is made by the manufacturer: Fratelli Comunello SPA, via Cassola 64, 36027 Rosà (VI), – ITALY
Represented by: Luca Comunello
Rosà, 02/20/24
53
Publicidad
