Tribest MJP-100 Manual De Funcionamiento página 8

4. OPERATING INSTRUCTIONS
STEP 1: Lift and turn the ARM twice,
rotating it toward the top of the press
to create a distance between the
STRAINER and the UPPER PRESS.
There should be enough room to put
a sliced fruit in between the UPPER
PRESS and the STRAINER.
Step 3: Place the BOWL into the
BOWL BRACKET by turning the
BOWL until it is in the correct locked
position.
8
Step 2: There is a locking system
between the BOWL and the STRAINER
that prevents the STRAINER from
rising during the juice pressing
process. Be sure that the STRAINER
is fully seated inside the BOWL before
operating the press as described in
the next step.
Step 4: Put half of a sliced fruit on the
STRAINER. Place your desired juice
container under the bowl. Be sure the
DRIP CUP is positioned to the side of
the juice container.