Publicidad
Idiomas disponibles
Idiomas disponibles
7. RS232 output
The equipment has an RS232
used to register measurements in a serial printer or data collector. The
outputs are the following ones:
Pin 2: Rx ; Pin 3: Tx ; Pin 5: Gnd;
Rate: 4800 bps
8 bits - no parity - 1 stop bit (8,n,1)
Note: In order to assure the compatibility with most printers available in
the market, the resistance units are shown with the following symbols:
uR = micro-ohm
mR = milli-ohm
R = ohm
8. Cleaning
Cleaning of this instrument should be carried out using a soft cleaning
anti-static liquid, after verifying that it doesn't affect the plastic parts used
in the case and in the Control Panel of this equipment.
output in the control panel that can be
16
Publicidad
