Publicidad
Remote Control
Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.
ONE TOUCH BUTTONS
Press to activate underbed
lighting. Press again to turn
o .
One touch ZERO-G® preset
position. Zero-G® adjusts
your legs to a higher level
than your heart helping
to relieve pressure o the
lower back and promote
circulation.
Preset Position #1.
Preset Position #2.
The programmable feature allows you to save custom
positions. Please read all the instructions below before
setting your custom presets on the remote.
Step 1: Articulate the head and foot to your desired position.
Step 2: Press and hold one of the preset buttons [I, II]
for 7 seconds.
Position is now saved.
NOTE: To restore the preset buttons back to their original
factory settings, hold FLAT and ZERO-G
least 10 seconds. The original presets will be restored.
To adjust the saved position, repeat steps 1 and 2 and the new
position will be stored.
Child Safety Lock
Activate Child Safety Lock
Press and hold FLAT + HEAD UP for more than 3 seconds, the
backlight will flash 2 times to indicate the successful activation of the
child safety lock.
When the child safety lock is on, click any button, the adjustable bed
will not respond and the backlight of the remote will flash 2 times as a
reminder.
Deactivate Child Safety Lock
Press and hold FLAT + FOOT UP for more than 3 seconds, the
backlight will flash 2 times, indicating the child safety lock out is
successful.
When the child safety lock is released, click any button, the adjustable
bed will return to normal.
®
simultaneously for at
11
Publicidad
