Publicidad
Connecting Strap (Optional)
Connecting straps are secured to the base frame upon delivery.
Legs are required for the installation of the connecting straps.
STEP 1
With the bases in their desired location, slightly loosen both legs
to allow the strap to fit on the leg bolt, between the leg washer
and frame.
14
STEP 2
Slide side (a) of the connecting strap onto leg bolt. Swing the
strap and connect side (b) to the leg bolt. Secure the strap by
shifting to the left.
a
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap and
repeat on other end of the base.
b
Publicidad
