SCHOTT EasyLED Manual Del Usuario página 21

You can switch the Spot Light on and off by pressing the main switch. If
the device is switched on, the blue control lamp lights up. To disconnect
the power supply, pull out the plug!.
Adjust the light intensity by turning the light intensity control. The scale
is divided into six brightness levels, from 0 to 5. The highest light intensity
is achieved at full deflection in position 5.
Attention: In the control position 0 the device is not switched off,
therefore the blue control light is on. To switch off the Spot Light, press
the main switch.
By repeatedly pressing the main switch, you can select between the
following operating modes for the Spot Light Plus Double:
Light head 1 ON, light head 2 ON, both light heads ON, both light
heads OFF, etc.
3.3 Start-up procedure
3.4 Light intensity setting
3.5 Operating mode selection
21