SCHOTT EasyLED Manual Del Usuario página 23

The EasyLED series system is maintenance-free.
Use a soft dry cloth or commercially available plastic cleaning cloths for
external cleaning of the device.
The use of cleaning agents, alcohol or any other chemicals is not
recommended.
If you are unable to remedy the fault using the measures described below,
please contact your specialist dealer or the nearest SCHOTT agency.
Typ of fault Possible cause
1. Lamp out •
•
•
2. Light intensity •
dropping
Remedy
Instrument not • Switch instrument
switched on on
Plug not in socket • Plug in socket
Power not provided • Check instrument is
to instrument connected to power
Lighting system • Switch off instrument.
overheated Ensure adequate
cooling, switch on
again after prolonged
cooling time.
5. Maintenance
6. Troubleshooting
23