Publicidad
Idiomas disponibles
Idiomas disponibles
Gear change
1. When shifting gears to the lowest speed, you must press the clutch lever and shift gears
while the machine is running.
2. When necessary, shift to the third gear, reduce the engine speed, then press the clutch lever
(B), cut off the engine power, and then change the speed. If it is difficult to shift successfully,
release the clutch lever (B) slightly to make shifting easier.
3. Three forward speeds and two reverse speeds.
4. Pay more attention when operating the machine in the third gear (fastest speed).
5. To engage the transmission to the implement, engage the clutch lever and place the control
rod in its forward position. If engagement is not immediate, release the clutch lever (C) slightly
and feel.
ATTENTION! Please note that on motocultors it is impossible to activate reverse
gear and move the rotary hoe simultaneously towards a safety device. The PTO must be
disengaged before engaging reverse gear.
Rev the engine and release the clutch lever
slowly and completely to start working.
Emergency stop / Safety device. Switch A
is always in the depressed position while the
tractor is running, as shown. If any emergency
situation occurs, simply release switch A and the
tractor will stop immediately.
Under difficult circumstances, if you release the engine stop lever, the machine will stop
immediately. It is not possible to press clutch lever B without pulling clutch lever C. When you
release clutch lever C, the machine will run; When clutch lever B is released, the machine
remains in neutral in this condition.
3. MAINTENANCE
ATTENTION!
• Turn off the engine before performing any maintenance.
• To prevent accidental starting of the engine, turn the engine switch to the OFF position
and disconnect the spark plug.
• The engine must be repaired by the authorized dealer, unless the user has proper
tools, repair materials and professional ability.
• Use our series of branded engine parts and their replacement. The motor can be
damaged by using a bad replacement.
Lubrication
Proper maintenance and lubrication will help keep the machine in perfect operating condition.
The machine may come from the factory with lubricant, however check the oil levels before
starting work.
English
Owner´s manual
25
Publicidad
