Create VEGAN MILK MAKER Manual Del Usuario página 9

FAULT
Indicator light will not turn on.
Indicator light is on, but the ma-
chine does not function properly.
The grinding chamber does not
intake water.
The motor works continuously
without pause.
Heat is continuously applied with-
out pause
Button is unresponsive.
Ingredients are not completely
broken down.
Overflow.
Burnt pot.
Operating duration is abnormally
long.
TROUBLESHOOTING
CAUSE
Power plug is not properly
inserted.
Display panel malfunction.
No selected program or function.
The water reservoir is either emp-
ty or is not adequately filled.
Temperature sensor or water level
electrode malfunction.
Water pump abnormality.
Blockage of water reservoir filter.
Water has seeped into the
machine.
Temperature sensor abnormality.
System is not fully reset after
brief power disruption.
Display panel button malfunction.
Too much or too little ingredients.
Machine failure.
Incorrect program function
selected.
Incorrect program function
selected.
Too many or too large ingredients.
Machine failure.
Mixing chamber is not completely
clean.
Too much ingredients.
Water temperature is too low.
Incorrect program function
selected.
SOLUTION
Make sure the plug is com-
pletely plugged in.
Send to after sales service
center for service.
Select a program or function.
Fill the water reservoir to
the appropriate water level
and place the reservoir in its
correct position.
Send to after sales service
center for service.
Send to after sales service
center for service.
Send to after sales service
center for service.
Send to after sales service
center for service.
Send to after sales service
center for service.
Disconnect from power for
two minutes before powering
back on.
Send to after sales service
center for service.
Add ingredients according to
the recipe in the instruction
manual.
Send to after sales service
center for service.
Choose the program function
appropriate for the intended
use.
Choose the program function
appropriate for the intended
use.
Add ingredients according to
the recipe in the instruction
manual.
Send to after sales service
center for service.
Make sure the Mixing
chamber is completely clean
before use.
Add ingredients according to
the recipe in the instruction
manual.
Use standard temperature
water.
Choose the program function
appropriate for the intended
use.
E NGLI SH
9