Truper COMP-120LV Instructivo página 14

Safety instructions
Technical characteristics
Belt drive air compressors
Installation and ventilation
Compressor full diagram
Operation
Maintenance
Electric diagram
Troubleshooting
Notes
Authorized Service Centers
Warranty Policy
Use and care recommendations
NEVER EXCEED the maximum pressure rating (PSI) of the tool or accessory
being worked on.
DO NOT OPERATE THE COMPRESSOR WITHOUT OIL.
Using a lubricating oil other than SAE-30 will void the warranty.
IF THE COMPRESSOR DOES NOT OPERATE AFTER A PROLONGED TIME OF
INACTIVITY, turn off the thermal switch as indicated on the label attached to the tank.
If the compressor still does not run or does not turn on, contact an
Authorized
ASSEMBLE the wheels and front support to keep the compressor level.
Perform periodic MAINTENANCE to your machine (page 6).
2
ENGLISH
3
4
To gain the best performance of
the tool, prolong the duty life,
4
make the Warranty valid if
necessary, and to avoid hazards
4
of fatal injuries please read and
understand this Manual before
5
6
Keep this manual for future references.
6
The illustrations in this manual are for reference
7
only. They might be different from the real tool.
8
10
11
12
Service Center.
Contents
CAUTION
using the tool.