Technical Data; Preparations At The Workplace; Charging The Battery - Hilti SD 5000-A22 Manual De Uso

4

Technical data

4.1 Screwdriver
Rated voltage
Weight, basic machine
Rated speed under no load
Socket/bit drive
Screw length
Screw diameter
Operating temperature
Storage temperature range (with-
out battery)
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the
charger.
*2242466*
21.6 V
1.0 kg
(2.2 lb)
0 /min ... 5,000 /min
(0 Hz ... 83.3 Hz)
Hex socket
≤ 55 mm
(≤ 2.2 in)
≤ 4.2 mm
(≤ 0.17 in)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
2242466
/ "
1
4
21.6 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
English 9