Intended Use; Charge State Display; Items Supplied; Overloading And Overheating Protection - Hilti SD 5000-A22 Manual De Uso

Motor cooling air intake
(
Forward / reverse selector
)
switch with safety lock
Lock button for continuous
+
operation
Control switch (with electronic
§
speed control)

3.2 Intended use

The product described is a hand-held cordless electric tool for use in drywall
installation work.
The power tool is designed for driving and removing screws in drywall
installation work. Drywall screws with a length of up to 55 mm and a
diameter of up to 4.2 mm can be used.
Do not use the product to work with materials hazardous to the health (e.g.
asbestos)
▶ Use only Hilti Li­ion batteries from the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series with these batteries.

3.3 Charge state display

The charge state of the Li­ion battery is displayed after pressing one of the
release buttons lightly (press only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.

3.4 Items supplied

Drywall screwdriver, operating instructions
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group.

3.5 Overloading and overheating protection

The drywall screwdriver is protected from overloading and overheating by an
automatic cut-out. Overloading or overheating is indicated by the four LEDs
blinking. After overheating, when the control switch is pressed to restart the
screwdriver, there may be a delay before the screwdriver restarts.
8 English
Belt hook
/
Charge-status and fault indi-
:
cator (Li-ion battery)
Battery release buttons
∙
Depth gauge
$
White LED to illuminate the
£
working area
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
2242466
*2242466*