Publicidad
ENGLISH
4. Turn the film advance lever and wind the film round the
take-up spool until both perforations are enaged on the
sprockets.
5. Close the back cover and press it firmly so that it locks
into position. Tilt up the rewind crank and turn in the direction
of the arrow to take up any slack in the film.
6. Advance the film until number one. that is the mark
between 0-2, appears in the frame-counter. If the film has
been properly loaded the rewind knob will rotate in an anti¬
clockwise direction when the film advance lever is operated.
Fig.7
7
Publicidad
