Publicidad
Idiomas disponibles
Idiomas disponibles
English
1. Mount the support wheels with the cotter pin and
cotter pin. fig. 6.
2. The support wheels can be rotated, so you can use
the adjustable draft, please adjust the depth before
working. fig. 7.
6.3. CHECK POINTS BEFORE START-UP
Before starting work, always check that the tiller is
working correctly and that it is safe to operate.
Check the machine and look for loose parts (bolts,
nuts, casings, etc..) and damage. Tighten, repair or
replace the parts that you have found to be in poor
condition. Do not use the machine if it is damaged or
incorrectly adjusted.
6.4. STARTING AND STOPPING
fig. 7
6.4.2. TURN ON AND TURN OFF
Power on the machine:
This machine has two compartments (A) and (B)
to place the batteries, one of which only serves as
storage (B) and is not usable.
To run the machine install the battery in the
compartments (A)
Turn the key from position (O) to position (I).
Press the button on the control panel once and it will
light green (turtle, slow speed).
Press the button on the control panel once more and it
will light yellow (rabbit, fast speed).
To use the reverse function, press and hold the button
so that "R" illuminates red. The button must be held
down while moving backwards. When the button is
released, the function will return to jogging speed
(turtle)
32/112
Publicidad
