Publicidad
Idiomas disponibles
Idiomas disponibles
Service instructions
Service instructions
Service instructions
Instruction for reversing
Changing the rotation direction of the tools is only possible while the tool is not running, i.e. the lever
must be completely released before the shifting is possible.
Clockwise rotation
Grip the gear shift ring and pull it backwards (A). Turn it anti-clockwise until stop (B). Release the shift ring
and make sure that the shift ring returns to its most forward position.
Only the arrows indicating clockwise rotation shall be visible (D).
Anti-clockwise rotation
Grip the gear shift ring and pull it backwards (A). Turn it clockwise until stop (C). Release the shift ring and
make sure that the shift ring returns to its most forward position.
Only the arrows indicating anti-clockwise rotation shall be visible (E).
Lubrication of gears in clutch casing
10
EN
© Atlas Copco Industrial Technique AB - 9836 9451 00
LTV29-2 R30-10
Publicidad
