Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
TO PLAY RECORDS
1. Set amplifier input selector switch to PHONO.
2. Turn on EQUALIZER switch (2 on equalizer.
3. Play record.
4. Adjust equalizer controls @.
- TO RECORD BROADCASTS
You can record on a tape deck connected to the equalizer or on a tape
deck connected directly to the amplifier.
- If the amplifier has a rec selector (REC SELECTOR), set it
to SOURCE or TAPE COPY 2 — 1.
1. Select TUNER as the amplifier input.
2. Turn on EQUALIZER switch (2 on equalizer.
3. Tune in desired station.
4. Adjust equalizer controls (6.
5. Begin recording.
* Some amplifiers do not permit recording equalized sound on a deck
connected to the amplifier TAPE 2 jacks.
TO PLAY TAPES
1. Select TAPE as the amplifier input.
2. If tape deck is connected directly to amplifier, turn off equalizer
TAPE MONITOR '> switch.
If tape deck is cennbetee to equalizer, turn on equalizer TAPE
MONITOR @) switch.
3. Turn on EQUALIZER switch (12) on equalizer.
4. Play tape.
5. Adjust equalizer controls (6.
TO EDIT TAPES
To transfer music from the tape deck connected to the amplifier to the
tape deck connected to the equalizer:
Select TAPE as the amplifier input.
Turn off equalizer TAPE MONITOR switch (9).
Turn on EQUALIZER switch (2 on equalizer.
Play tape in tape deck connected to amplifier.
. Adjust equalizer controls (8.
. Begin recording on tape deck connected to equalizer.
OaRWN>
To transfer music from the tape deck connected to the equalizer to the
tape deck connected to the amplifier:
If the amplifier has a rec selector (REC SELECTOR), set it
to SOURCE
or TAPE COPY 2 > 1.
. Select any source except TAPE as the amplifier input.
Turn on equalizer TAPE MONITOR switch @).
Turn on EQUALIZER switch (2 on equalizer.
. Play tape in deck connected to equalizer.
. Adjust equalizer controls (6.
. Begin recording on deck connected to amplifier.
USING THE MEMORY
PRESET AND PROGRAM
EFFECTS
There are five equalization presets: HEAVY, CLEAR, SOFT, VISUAL,
and VOCAL. Five more equalization curve ''programs'' can be stored.
STORING EQUALIZATION CURVES IN MEMORY
1. Adjust the equalizer controls.
ONRWN=
steoosceccars
vaneentesees
2
:
:
2228
63
185
'R50
500
'tk
Rk
ak
Bk
16k
LEVEL
SPA
2. Press the MEMORY switch @.
The indicator will flash for about five seconds.
3. Press one of the memory recall switches (18) (A through E) before
the indicator stops flashing.
HEAVY
CLEAR
SOFT
VIBUAL
VOCAL
-}
c
o
E
[Heavy]
VOEAL
Press this switch to store in A.
Program memory may be erased if power is left off for about two weeks
or more.
MEMORY RECALL
1. Press the PRESET/PROGRAM
switch (9 to select the presets or
your own programmed effects.
© When the PRESET indicator is on, you can select any of the preset
effects: HEAVY, CLEAR, SOFT, VISUAL, or VOCAL.
® When the PROGRAM
indicator is on, you can select any of the
effects stored in A through E.
DIsP
Oo
°
CT SL VC
eT aca VocaL
PRESET/
TAPE monitor
(6) eaua.izern©) BROGRAK
2. Press one of the memory recall switches (8).
HEAVY
um
BOFT
VIBUAL
VOCAL
Ca
E
[aeavy J[ecean J
VEAL
Press this switch to recall
the curve stored in B.
USING THE REVERSE SWITCH
This turns the current. equalization curve upside down. After record-
ing a tape with equalization, you can return the sound to normal by
turning on this switch with the same equalization setting.
svepensoasine
wepevanees
veeeneereeste
Pa
careceuestnes
on
a
x
sttvetooneren
oanreeettoone
venreeveoonne cvepeareentee
S
=
:
()
@B
e850
soo
1k
Rk
4k
"tek CEVEL BP
9
<ARE10 98>
Publicidad
