Publicidad
Idiomas disponibles
Idiomas disponibles
Wired Controller XK46
Turn off the Light: When light of indoor unit is on, press FUNCTION button to select
Light. Then press ENTER/CANCEL to turn off the light.
Note:
When there is no button operation on the wired controller or no remote control
signal is received for 20s continuously:
① If Light function is activated, the back light of LCD will turn to half bright.
② If Light function is off, the back light of LCD will be off.
3.11 SAVE SETTING
Save Function: Air conditioner can be operated in small temperature range by
setting the minimum temperature under Cooling and Dry modes and setting maximum
temperature under Heating, 3D Heating and Space Heating modes. Thus, energy
saving can be realized.
Save Setting:
Save Setting for Cooling: When unit is on and under Cooling or Dry mode, press
FUNCTION button to select Save function. "
Press "
" or "
ENTER/CANCEL button to activate this function.
Fig.4.7 Shows how to set Save function for Cooling:
Press FUNCTION button and select Save
" button to adjust to the minimum temperature. Press
" icon will blink and MIN icon lit up.
Press "
" or "
minimum temperature
30
" button to adjust the
Publicidad
