Gree XK46 Manual página 18

Save Setting for Heating: When unit is on and under Heating, 3D Heating and
Space Heating modes, press FUNCTION button to select Save function. "
blink and MAX icon lit up. Press "
temperature. Press ENTER/CANCEL button to turn on this function.
Turn off Save Function: Press FUNCTION button and select Save function. "
icon blinks. Then press ENTER/CANCEL button to cancel this setting.
3.12 FILTER CLEAN REMINDER SETTING
Filter Clean Reminder Function: Unit will remember its own operating time. When
the setting time is up, this function will remind you to clean the filer. A dirty filter will
result in bad heating and cooling performance, abnormal protection, bacteria gathering,
etc.
Turn on Filter Clean Reminder Function: When unit is on, press FUNCTION button
and select Filter Clean Reminder. "
adjust the cleaning level, of which the range is 00, 10-39. Press ENTER/CANCEL to
turn on this function
Turn off Filter Clean Reminder Function: When unit is on and this function has
been turned on, press FUNCTION button and select Clean. Then "
Set the cleaning level as 00 and press ENTER/CANCEL function to cancel this setting.
When Filter Clean Reminder time is up, "
clean the filer. Press FUNCTION button to turn to Filter Clean Reminder Function, then
press SWING/ENTER to cancel reminding, and it will retime according to the original
cleaning level. The clean reminding can be cancel only when you didn't reset the
Press ENTER/CANCEL button to activate Save function
Fig.4.7 Save Setting for Cooling
" or "
" icon will blink. Press "
31
Wired Controller XK46
" button to adjust the MAXIMUM
" or "
" icon will light up to remind you to
" icon will
"
" button to
" icon will blink.