Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
-
Fill the water tank without exceeding the maximum capacity.
Dry ironing
-
When the indicator light changes from flashing blue to steady blue, it means that you can
start ironing.
-
For dry ironing, DO NOT press the steam button.
Steam ironing
-
Fill up the water tank.
-
When the indicator light changes from blue to red, it means that the iron has finished
preheating and you can start ironing: press the steam button to make the soleplate emit
steam.
-
If the iron makes a sound when you press the steam button again, this means that you
have pressed the button too many times in a row and the pump has stopped working.
-
Turn the steam conversion knob to "
ejection at the front of the iron. Turn the steam conversion knob to "
that there is a large steam ejection area at the bottom of the iron.
Cleaning function
-
Press and hold the steam button for 2 seconds to activate the cleaning function.
-
Make sure there is enough water in the tank.
-
Press the steam button repeatedly to start the pump and clean the soleplate of the iron.
-
Press and hold the steam button again for 2 seconds to deactivate the cleaning function.
Auto switch-off
After 8 minutes of inactivity in vertical position or 30 seconds in horizontal position, the
indicator light will flash red, 6 acoustic signals will be heard, and the iron will switch off
automatically. To switch it on again, move it or shake it slightly: the iron will emit an acoustic
signal to confirm that it has started up correctly.
Overheating protection function
If the soleplate temperature exceeds 260 °C, the indicator light will flash red and the iron will
beep; if this happens, switch off and unplug the iron immediately.
4. CLEANING AND MAINTENANCE
-
Allow the appliance to cool down completely before storing it.
-
Clean the soleplate and the outer surface of the iron with a damp cloth. To avoid
damaging the soleplate, avoid using hard or abrasive objects for cleaning.
-
If the iron is dirty, you can clean it with a damp cotton cloth and a little neutral detergent.
Do not use strong acidic or alkaline products.
-
If limescale deposits form on the soleplate, remove them from the steam vents with a
toothpick or similar.
-
Before storing the appliance, allow the soleplate to cool down completely.
32
IRONHERO 3200 DOUBLE STEAM I-PUMP
"; this indicates that there is a strong steam
"; this indicates
Publicidad
