Olimpia splendid 9K-12K Instrucciones Para El Uso Y El Mantenimiento página 332

REMOTE CONTROL
TIMER function ---- TIMER ON
To automatic switch on the
TIMER
appliance.
When the unit is switch-off, you can set the
TIMER ON.
To set the time of automatic switch-on as below:
TIMER
1. Press button first time to set
the switch-on,
remote display and flashes.
2. Press or to button to set desired Timer-on
time. Each time you press the button, the time
increases/decreases by half an hour between 0
and 10 hours and by one between 10 and 24
hours.
TIMER
3. Press button second time to confirm.
4. After Timer-on setting, set the needed mode
(Cool/ Heat/ Auto/ Fan/ Dry), by press the
MODE
button. And set the needed fan speed,
FAN
by press button. And press
the needed operation temperature.
TIMER
CANCEL it by press
TIMER function ----- TIMER OFF
To automatic switch off the
TIMER
appliance.
When the unit is switch-on, you can set the
TIMER OFF.
To set the time of automatic switch-off, as below:
1. Confirm the appliance is ON.
TIMER
2. Press the
switch-off.
Press or to set the needed timer.
TIMER
3. Press button at the second time to
confirm.
TIMER
CANCEL it by press
Note: All programming should be operated within
5 seconds, otherwise the setting will be
cancelled.
and will appear on the
or
button.
button at first time to set the
button.
SWING function
SWING
1. Press the button SWING to activate the louver,
1.1 Press
to swing from up to down, the
on the remote display.
Press again to stop the swing movement at
the current angle.
1.2 Press
to swing from left to right, the will appear
on the remote display.
Press again to stop the swing movement at
the current angle.
2. If the vertical deflectors are positioned manually
which placed under the flaps, they allow to move
the air flow direct to rightward or leftward.
3. For some inverter heating models, press
to set
horizontal SWING and vertical SWING together
button at the same time, it will activate the
Self-Clean function.
This adjustment must be done while the
appliance is switched off.
Never position Flaps manually, the delicate
mechanism might seriously damaged!
Never put fingers, sticks or other objects into
the air inlet or outlet vents. Such accidental
contact with live parts might cause
unforeseeable damage or injury.
TURBO function
TURBO
To activate turbo function, press the
button, and
Press again to cancel this function.
In COOL/ HEAT mode, when you select TURBO
feature, the appliance will turn to quick COOL or
quick HEAT mode, and operate the highest fan
speed to blow strong airflow.
10
SWING
to activate the horizontal flaps
SWING
SWING
to active the vertical deflectors
will appear on the display.
will appear
TURBO