Publicidad
Idiomas disponibles
Idiomas disponibles
Indicator
Charge
100%
75%
50%
25%
Blinking 3 times: there is 15
minutes or less left.
Recommendations for Optimal
Handling of the Battery
Protect the Battery against moisture and wa-
ter.
Only store the Battery within a temperature
range of -4°F to 158°F (–20°C to +70°C). Do
not leave the Battery in your car in the sum-
mer, for example.
A significantly reduced operating time after
charging indicates that the Battery has dete-
riorated and must be replaced.
Follow the instructions on correct disposal.
Fitting the Camera Cable
(Fig. 4)
For operation of the inspection camera, the
Camera Cable 1 must be fitted on the Hand-
held Device 13.
Push the connector of the Camera Cable 1
onto the Camera Connection 19 in the cor-
rect position until it clicks into place.
Fig. 4
13
Assembly
Removing the Camera Cable
(Fig. 5)
To remove the Camera Cable 1, press the
Cable's Locking Mechanism 20 and pull the
connector out of the Handheld Device 13.
Fitting the Mirror, Magnet or
Hook
(Fig. 6)
The Mirror 21, the Hook 22, or the Magnet
23 can be fitted on the Camera Head 2 as
accessories.
Push one of the three accessories all the
way onto the Camera Head 2.
Note: The Magnet 23 and the Hook 22 are
only suitable for moving and removing loose,
small and light objects. The inspection cam-
era or the accessory can be damaged with
too strong a pull.
19
1
-11-
Fig. 5
13
20
20
1
Publicidad
