Publicidad
Idiomas disponibles
Idiomas disponibles
Note: The function is limited if a Mir-
ror 21 is fitted and/or with a vertically
aligned Camera Cable 1.
• <Gallery>: This is where recorded pho-
tos and videos can be accessed.
You can select the required file based
on its date using the Down Button 10 or
the Up Button 7.
Press the Right-Hand Button 11 or the
Center Button 9 to see a preview of the
selected photo or video.
To open the selected file, press the
Center Button 9.
Note: If a Micro-SD Card 28 is inserted
into the Micro-SD Card Slot 29 on the
Handheld Device 13, only files saved on
this Micro-SD Card 28 are displayed. To
open photos from the internal storage,
you must first remove the Micro-SD
Card 28 from the Micro-SD Card Slot 29
under the Top Flap 30.
• <Camera mode>: Choose between
<Photo> and <Video> for recordings.
• <Display brightness>: Set the required
brightness for the display.
• <Color>: Switch between the color view
and black/white view of the display.
• <Device settings>
<Date & time>: You can set the date and
time for saving photos or videos and
select the date and time format.
Note: If the date and time can no
longer be saved, the built-in coin cell is
drained.
Contact an authorised Bosch-after-sales
service center if this happens.
Fig. 8
32
Operation
30
29
28
<Language>: Select the language used
in the display.
<Switch off after ...>: Choose the time
interval after which the inspection cam-
era will switch off automatically if no
button is pressed.
• <Device info>: Here you will find device
information, such as the installed soft-
ware version and legal information.
• <Factory reset>: You can reset all of the
menu options to factory settings. This
also simultaneously and permanently
deletes all of the saved files.
Saving/Transferring the
Recordings
Taking Photos/Videos
(Fig. 1, Fig. 7, Fig. 8)
If a Micro-SD Card 28 is inserted into the
Micro-SD Card Slot 29, the photos and vid-
eos are saved on the card.
If no Micro-SD Card 28 is present, photos
are stored on the internal storage on the
inspection camera and it is not possible to
take videos.
Photo mode: Press the Photo/Video Record-
ing Button 12 to take a photo of the current
display view.
Video mode: To start filming a video, press
the Photo/Video Recording Button 12. The
the Recording Mode Symbol 24 will appear
on the Display 5.
To stop recording, press the Photo/Video
Recording Button 12 again or the Center
Button 9.
You can switch between photo and video
mode in the <Main menu>.
Fig. 9
-14-
31
Publicidad
