Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
•
Please do not use any tools for installation, only install the
appliance by hand.
•
If temperatures below freezing are expected, the applian-
ce should be removed from the tap and stored indoors to
avoid possible frost damage.
5.1 Activate the device before use
Please activate the device before using it for the first time or
after a period of inactivity.
1.
Leave the tap turned off.
2.
Turn the watering control to „ON".
3.
Press and hold the „MANUAL" button for 3-5 seconds to
activate manual watering mode.
4.
After a „click" sound is heard or after a waiting time of
approx. 5 seconds, the valve in the timer is opened, then
turn the rotary switch to „OFF" to close the valves.
5.
Repeat steps 2-5 approx. 3-4 times.
Turn the tap on a little to test and then repeat steps 2-5 to check
whether the water flows out as expected or is switched off.
English
27
Publicidad
