Brandson Equipment 306616 Instrucciones De Uso página 32

Rain Delay-Funktion
With the rain delay, you can postpone watering for a certain
period of time without interrupting the set watering schedule.
To activate the rain delay, follow the steps below.
1. When the selection dial is set to „ON", press and hold the
„DELAY" button for 3-5s to activate delay mode.
2. In delay mode, the „24H" option flashes on the screen.
Press „+" and „-" to select the delay time of 24H, 48H and
72H.
3. Press the „OK" button to start the delay function, then a
countdown of the remaining delay will be displayed on
the screen.
4. To cancel the rain delay, press and hold the „DELAY"
button again for 3-5 seconds to resume your programmed
watering schedule.
Note: Remember to press the „OK" button after selecting the
rain delay time to start the rain delay programme. Otherwise,
the rain delay setting will be cancelled automatically after the
screen flashes for 3-5s.
7. Manual watering mode
This function allows you to water manually without interrupting
your set watering schedule.
1. Turn the selection dial to „ON".
2. Press and hold the „OK/Manual" button for 3-5s to call up
the manual watering mode.
3. Use the „+" or „-" button to set the manual watering time
from 1 minute to 8 hours. (Press and hold the „+" or „-"
button to quickly increase or decrease the time).
32
English