Brandson Equipment 306616 Instrucciones De Uso página 29

Determine start time („
After connecting the Water Computer to the tap and the hose of
the irrigation system, set the start time of the irrigation.
1. Turn the selection dial to „
2. Use the „+" and „-" buttons to set your start time.
3. Press the „OK/Manual" button to change the time (hours
or minutes).
4. Turn the selection dial clockwise to save the changes in
this step and go to the next step.
Note: When the setting of this step is complete, please turn
the selection dial to save the changes instead of pressing the
„OK/Manual" button. If you press the „OK/Manual" button, the
device will return to the previous setting instead of saving it.
Determine watering duration (
1. Turn the selection dial to „
2. Use the „+" and „-" buttons to set the watering duration.
3. Use the „OK/Manual" button to switch between hours
and minutes.
4. Turn the wheel clockwise to save the changes in this step
and go to the next step.
Note: When the setting of this step is complete, turn the selecti-
on dial to save the changes instead of pressing the „OK/Manual"
button. If you press the „OK/Manual" button after the setting,
the device returns to the previous setting instead of saving it.
The running time can be set to a maximum of 3 hours and 59
minutes.
English
")
".
)
".
29