Brandson Equipment 306616 Instrucciones De Uso página 31

Activate programme
Once you have set the watering cycle, set the selection dial to
„ON".
The LCD screen displays the current time and the next watering
start.
Note: The automatic watering programme only runs when the
rotary switch is in the ON position.
After successful programming, turn the water tap to which the
device is connected fully open.
If the selection dial is not in the „ON" position, all watering sche-
dules are stopped and do not start automatically. The automatic
watering schedules are only executed when the selection dial is
in the „ON" position.
Then turn the selection dial back to „ON".
If the current time has exceeded the set start time of the pro-
gramme, all watering schedules for this day will be skipped and
the automatic watering programme will start watering at the
frequency you have set from the start time of the next day.
If the start time of the automatic watering schedule for the
day has not yet been reached, the watering schedule will be
executed normally from the start time of the day according to
the frequency you have set.
31
English