Hoover H5WPB447AMBC/1-S Mnaual Del Usuario página 75

WARNING:
don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME selector with OFF
position
When the programme selector is turned

the display lights up to show the settings
for the programme selected.
Switch off the washing machine by

turning the selector to OFF.
First starting
- Language setting
 After connecting the machine to the
network and turning it on, press the "B"
or "C" button to display the available
languages.
Select the desired language pressing the

START/PAUSE button.
- Change the language
If you want to change the setting language
you will have to press simultaneously "D"
and "F" buttons for about 5 seconds.
ENGLISH will appear on the display, and
you will be able to choose a new language
(by pressing button "B" or "C").
- Choosing the type of detergent used
Thanks to Eco Doser, the appliance is

able to suggest the optimal amount of
washing detergent to pour into the drawer
based on the actual load.
In order for the Eco Doser to work

properly, it is necessary to select the type
of detergent used, choosing between
normal or concentrated liquid detergent or
powder detergent.
the machines
75
Press button "B" or "C" to display the

available options and press START/
PAUSE to confirm your choice.
- Changing the type of detergent used
If you wish to change the type of detergent

used, you will need to press and hold down
buttons "F" and "G" simultaneously for
about 5 seconds. The display shows the
detergent selection option again.
Press button "B" or "C" to display the

available options and press START/
PAUSE to confirm your choice.
- Setting the Water hardness level
In order to make some automatisms of the
appliance work correctly, it is necessary to
set the Water Hardness level.
The default setting for the water
hardness is set in the factory at level 2
(L2) as this satisfies the requirements
of the majority of users.
Water Hardness level:
L1 = LOW (0-12 °fH o 0-7 °dH)
L2 = MEDIUM (13-30 °fH o 8-17 °dH)
L3 = HIGH (≥ 30 °fH o ≥ 17 °dH)
To confirm the standard water hardness

level set by the factory, press START/
PAUSE button.
 If you want to change the standard water
hardness setting, press the "B" or "C"
button.
Once chosen the water hardness level,

confirm by pressing the START/PAUSE
button.
- Changing the Water hardness level
setting
If you wish to change the water hardness

setting, it is necessary to first go through
the language change menu (and change
the type of detergent used) by holding
down buttons "D" and "F" simultaneously
for about 5 seconds.
Once you have configured the language
(and the type of detergent used) as
explained in the dedicated paragraphs,
you can select
hardness level using button "B" or "C".
the desired water