Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation guidance
All connections whether hydraulic or electrical must be made by suitably trained personnel.
Mounting
Mounting clips and screws shown in
installed positions.
Mounting Instructions
1. Slide mounting gasket (not shown)
over unit body until adhesive
surface makes contact with the
front bezel.
2. Slide unit into cut out in panel.
3. Attach mounting clips and screws.
4. Tighten screws until unit is firmly in
place. DO NOT OVER-TIGHTEN
screws to the point of squeezing
the gasket out from behind the
bezel.
4
4
Panel Cutout
3.622± .031"
(92.00)
Max. Panel ~Thickness
.190" (4.8)
4.04" (102.6)
Publicidad
Tabla de contenido
