HyperMotion TRAMPOLINE HYP 54 IN Manual Del Usuario página 26

25
ASSEMBLY
IMPORTANT
Before Assembling
Please understand there is always a risk of injuries when using tools or doing technical
work. The owner (or installer) should follow
the guidelines below for the assembly and should take responsibility for any improper
operations.
1. Start your work in the room where you prepared for the trampoline because this
structure should not be placed outdoors and is not allowed to be moved from
one place to another after the assembly.
2. Check and confirm you have all labeled parts according to the chapter Parts List. If you
need any replacement(s), feel free to reach out to Customer Happiness Executives with
the ORDER NUMBER, PART NUMBER, REQUIRED QUANTITY for each
part, and photos or videos (if applicable).
3. Wear gloves and use the Bungee Cord Loading Tool (#12) and the Screw Driver Set (#13)
when you assemble the trampoline. The owner (or installer) should take responsibility
for any possible injuries if they forget to wear and use them.
Do not move the trampoline from one room to another
without dissembling the structure after the assembly.
Please read the assembly instructions before starting your work.
03