(b) Tie the elastic rope on the pad to the foot of each steel pole.
IMPORTANT
Hold the steel leg that you're working on with your thumb and index finger (of one hand)
and pull the elastic rope with another hand.
You should NOT place the elastic rope in the way as shown below because it will tear
up the corner of the pad.
STEP 4 - V-POLE ASSEMBLY
There are three steps listed as (a), (b), and (c).
(a) Align the hole of the V-pole (#7) with the hole on the frame.
Please do NOT tie the straps because
we'll introduce the details in Step 6.
EN
30